Wohler 4798 Power Supply

Old part number 3789

New part number 4798

Your inspection camera’s power supply, or PSU, is a critical part of your investment. It has to supply the exact or near exact voltage at the required wattage to all of the circuitry inside your push camera control station The processor and memory are particularly sensitive and require an exact supply or as near as possible. The purpose of the power supply is to convert AC to DC and in turn the DC voltage supplies power to the motherboard, adapters and other peripheral elements.   As a Global Supplier of remote visual inspection equipment the Wohler 3789K power supply is designed to perform in both 110V and 220V environments.   In fact, most countries have a different plug adapter from the US / North America plug and the complete power supply package will comes with supporting adapters  Not all power supply devices are the same, even if the look the same.  This system is specifically designed with 18V, 1,5A, 100-240V, 50 Hz, 2.1 mm female plug, center plus.  Average full time charge is approximately 3 hours.

This inspection camera accessory is designed to work with:
Wohler 6258   Plumbing Camera with 1 inch camera head
Wohler 6352   Plumber Camera with Detachable 1.5 inch camera head  [Wohler VIS350D] Wohler 7354   Pluming Camera with attached 1.5 inch pan & tilt camera head. [Wohler VIS350] Wohler 8927   Plumber’s Camera with both 1.5 inch detachable inspection camera head and 1 inch  [Wohler VIS 350 Plus] Wohler 8931   Plumber Camera with both 1.5 inch detachable inspection camera head and 1 inch and locator [Wohler VIS 350 Plus] Wohler 8932   Plumbing Camera with attached 1 inch camera head and locator

Request A Quote