6 Mistakes to Avoid When Using Sewer Camera for Pipe Inspection

by | Jul 21, 2020 | News

Sewer line cameras help diagnose sewer line problems. These cameras ensure that commercial and residential sewer lines remain in flawless condition.

Following proper procedures is necessary when using pipe inspection cameras. Here are some mistakes that you should avoid when using a pipe inspection camera for sewer line inspection.

1. Never Push the Camera with Force

Most issues with the camera occur when it is pushed inside the pipe with force. Forcing the probe inside the pipe can damage the cable and lens. Maintenance crew must insert the tube carefully inside the pipe.

2. Don’t Use Short, Fast Motions

Another common mistake when using a sewer inspection camera is to use fast motions to get the probe around bends and corners. This could damage the lens of the camera.

To avoid damage, the camera must be moved around slowly inside a pipe. If you move the probe inside the pipe with fast motion in a bid to finish the inspection process quickly, you could end up with a faulty camera that would cost hundreds of dollars in repairs.

3. Always Stand Next to The Drain Opening

The person operating the camera must kneel beside the drain opening when using the camera. The camera can break if the maintenance crew pushes it inside the opening while standing.

A technician must make sure that their hand is near the opening when pushing the camera inside the drain hole. The reeling can kink up and damage the camera if standing when inserting the tube inside the tube.

4. Never Continuously Immerse the Camera in Liquid

Many times a camera becomes defective when the plumbing repair crew immerses it in any liquid thinking that the tube is waterproof. Although the tube is indeed waterproof, the camera is not designed to be continuously soaking in liquids .   The camera should be stored in a dry place and out of direct sunlight as continuous exposure to the sun can dry and crack the camera lenses and supporting adhesive materials.   

5. Don’t Subject the Camera to High Heat

Do not expose the camera to high heat above 80C or 176F. Exposing the camera to high heat can damage it. You should follow the instruction manual about the high and low-temperature threshold for operating the camera.

6. Never Bend the Tube

The tube or coil of the pipe camera should not be winded. Winding the tube will damage the fiber optics, thereby reducing the quality of the image. It will also damage the articulation cables that will require costly repairs.

You should keep the camera in the proper storage case when not in use. Ensure that the insertion tube is safely inside when closing the lid.

Make sure that you buy a sewer camera from a reliable store online. USA Borescopes is a name of trust that is associated with the sale and repair of pipe inspection cameras for years. Contact us today to know more about our commercial quality pipe inspection cameras.